产品中心
首页
>
AOS
>
功率IC
- 产品概况
- 产品特点
-
The AOZ1361DI is a high-side load switch intended for
applications that require circuit protection. The device
operates from voltages between 4.5V and 28V, and can
handle a continuous current up to 3A. The internal
current limiting circuit protects the input supply voltage
from large load current. The current limit can be set with
an external resistor. The AOZ1361DI provides thermal
protection function that limits excessive power
dissipation. An open-drain fault indicator pulls low when
an over-current or thermal shutdown event occurs. The
device employs internal soft-start circuitry to control
inrush current due to highly capacitive loads associated
with hot-plug events. It features low quiescent current of
220µA and the supply current reduces to less than 1µA in
shutdown.
The AOZ1361DIis available in a 10-pin 4x4 DFN
package and can operate over -40°C to +85°C
temperature range
-
制造商零件编号：AOZ1361DI-02
制造商：Alpha & Omega Semiconductor Inc
描述：IC LOAD SW HI-SIDE CC PROG 10DFN
系列：-
开关类型：通用
输出数：1
比率 - 输入:输出：1:1
输出配置：高端
输出类型：P 通道
接口：开/关
电压 - 负载：4.5 V ~ 28 V
电压 - 电源 (Vcc/Vdd)：不需要
电流 - 输出（最大值）：-
Rds (On)：22 毫欧
输入类型：非反相
特性：自动重启，压摆率受控型，状态标志
故障保护：限流（可调），超温，UVLO
工作温度：-40°C ~ 85°C （TA）
封装/外壳：10-WDFN 裸露焊盘35mΩmaximum on resistance
●2A minimum continuous current
●Programmable current limit
●4.5V to 28V operating input voltage
●Low quiescent current
●Under-voltage lockout
●Thermal shutdown protection
●Open-drain fault indicator with delay
●Small 4x4 DFN package
●2.5kV ESD rating
